This project is an ongoing job at the Tanger Outlets in West Ocean City Maryland. Among other things we will be doing roofing work, demolition, and carpentry work through out the next several months. The first phase of the project will be to remove all the existing concrete shingles through out selected areas of the mall. This includes all of the towers.  We will also remove all the existing paper and check the plywood to make sure its intact.  If we find that its not in good condition we will then replace the plywood. We then will store all of the roof shingles in sea containers for later use. We estimate that we will remove approximately 14,000 shingles by hand and with out breaking them. Once the shingles are removed we will install ice and water shield in preparation for the new Standing seam metal roof that will be installed. We estimated this phase of the project would take 1 month but it was completed in 2.5 weeks.

Please give us a call if you would like an estimate on commercial roofing, residential roofing, commercial siding, residential siding, demolition, decking or any other commercial or residential project. We are a local Ocean City Contractor licensed in Maryland and Delaware.

In this project we were contracted to remove 7 metal false dormers on the roof of an outlet center in Ocean City Maryland. The Dormers are 18 foot long by 14 foot high and weigh about 2,000 lbs a piece. 

We had to secure the Dormers with our Forklift and cut the metal at 5 points where they were  attached to the metal framing of the building. The steel on the dormers is .25 inch thick. We first removed the roof around the structure and the proceeded to cut the metal with a metal cut off saw.

During a demolition project it is hard to predict how things are going to progress. After realizing that the cut off saw was taking too long we moved on to our plasma cutter. We protected the areas below with burn blankets and proceeded to cut the structure with the plasma cutter. This made the process move  a whole lot faster. We have done other selective demolition jobs in Maryland and Demolition jobs in Salisbury where we have used the plasma cutter and it is a great tool for certain jobs.

We were able to remove all the dormers in 2 days and repair the roof in all of the areas were the structure was removed with out any problems. If you have a selective demolition job, interior demolition job, tenant fit out or any kind of demolition project please give us a call for a free estimate. We have all the equipment and tools to get the job  done along with an outstanding safety record.  Call Apex Construction at 240-793-5867